Ajax alarmsysteem wizard

Configure alarm system - Hub

The Hub is the central point of the alarm system, with which the detectors and other accessories communicate wirelessly via a secure two-way connection. The specifications of the Hub state whether it also has a SIM card slot or supports WiFi in addition to working on a network cable. It is important to look at the detectors and accessories to see which Hub supports them. For example, the PIR motion detectors with photo verification only work with the Hubs that support photo verification.

Magnetic contacts

The magnetic contacts can be used to secure windows and doors and give a wireless alarm signal to the Hub when they separate.

Indoor motion detection

The motion detection sensors can detect movement in a certain room and will then immediately send a wireless alarm signal to the Hub.

Motion Detection Outdoor

These sensors are specially made to detect movement outside and are therefore resistant to weather influences.

keypads

By default you can control the Hub from the App, but the following physical keypads can also be used with the alarm system.

RFID tags

RFID tags can only be used in combination with the Keypad Plus models and can simplify access control.

Sirens

Sirens can be used to give a notification in the event of an alarm, but can also give (bell) signals if certain detectors are activated while the alarm is off.

Smoke detectors

Depending on the model, the smart smoke detectors will immediately send a wireless alarm signal to the Hub in case of heat or smoke, but they also have a built-in siren.

Automation

Smart sockets and relays make it possible to control and automate electric locks, gates, water heaters and other devices.

Ajax camerabewaking

accessories

With these recommended accessories you can get even more out of your alarm system.

Uw totale pakket kost: € 0