Driveway indicator IR beams Solar Line 100M PLUS

Driveway indicator IR beams Solar Line 100M PLUS

Driveway indicator IR beams Solar Line 100M PLUS

€ 269,90
In stock
SKU 9316
  • Klanten beoordelen ons met een 8.6 op basis van 621 reviews
  • Experienced customer service and 2 year warranty
  • Specialist since 2007 Thuiswinkel Waarborg Sitcon
Mitch

Bel productspecialist Mitch

030-6303631

Specifications: Driveway indicator IR beams Solar Line 100M PLUS

ConformityCE
DetectorMovement
Alarm typeDriveway alert
SireneIntern
AudioYes
Alarm notificationCall signal
Decibel alarm< 80 decibel
Smartphone APPNo
BatteryYes
Battery typeLi-ion recharchable
Battery working time3 - 6 months
Max. wireless sensors8 Wireless sensors
Wireless frequency433 Mhz
Zend afstand> 100 Mtr.
Adapter voltage5 volt
SKU9316

Pros and cons :

  • The 3 IR beams have very accurate motion detection compared to PIR motion detection.
  • Multiple motion sensors from the PLUS range can be connected to the system
  • The use of multiple receivers is also possible.
  • The built-in solar panel always charges the battery for worry-free operation.
  • The driveway detector works both during the day and at night.
  • Easy installation due to the built-in LCD calibration
  • At speeds above 20 km, movements are not always detected by the IR beams.

This driveway detector IR beam set 100M PLUS consists of a base station and two wireless beam detectors with built-in solar panel to detect movements. This driveway detector system can be used in different weather conditions where the IR beams can be placed up to 100 meters apart at a distance of up to 400 meters from the base station.

How does the driveway detector IR beam alarm work:
The base station supplies you with power with the included adapter. Place the wireless IR beams directly opposite each other at a distance of up to 400 meters from the base station, with a maximum distance of 100 meters between the beams. When the 3 infrared beams are broken, the wireless beams will send a message to the base station, which will then emit a signal set by you via the built-in speaker.

Wireless receiver operation:
The wireless receiver can be set to 35 different tones and 4 volume levels. Up to 32 sensors can be linked to a receiver. The wireless receiver must be supplied with power using the supplied adapter. Optionally, use of up to 100 hours on a rechargeable battery is possible when you install 4 AA batteries.

Operation of wireless IR beams:
There are 3 IR emitters on the beams. All three of these must be broken simultaneously to trigger a notification. The beams contain an LCD calibration to accurately adjust the beams to the same height. T If, for example, cyclists pass by at normal speed and need to be detected, it is important that the beams are at average saddle height. At higher speeds than 20 km per hour of cars / cyclists, etc., the beams will not register all movements.

Battery and solar panel operation:
The IR beams have a solar panel that charges the built-in battery when there is sufficient sunlight. For proper operation, the solar panels must receive sufficient light. In poorer lighting conditions, the battery of the IR beams may need to be recharged periodically. We supply a 12 volt adapter for this, so that you can do this yourself when necessary.

Install additional sensors and receivers.
This motion alarm can be expanded with additional receivers and detectors. For example, you can place a motion detector in your front and backyard. The other way around is also possible with an extra receiver. For example, you can place an extra wireless receiver in your garage so that you also receive notifications of movement there. All motion detectors from the PLUS line are compatible with this system.

Can be optionally connected to an existing alarm system:
If you want to connect this visitor detector to an existing alarm system, this cannot be done directly wirelessly. This is because this driveway detector transmits on a specially tuned frequency. It is possible to use the wireless relay which can be ordered with this product under the accessories heading. The wireless relay then works as an extra receiver and can then be connected by wire to a free alarm port of the alarm system. When the sensor then gives a message, this will also be passed on to the alarm system.

Base station features:
- Up to 32 sensors can be linked
- Can be placed horizontally or on a wall
- Adjust volume and signal
- Works on a 5 volt 1.5 ampere adapter
- 433Mhz FSK + FHSS
- 433Mhz FSK + FHSS
- Possibility to install 4 AA batteries as a backup
- Works up to 100 hours on 4 AA batteries

Features of solar beam detectors:
- 433MHz FSK + FHSS
- Up to 100 meters infrared distance between beams
- Up to 400 meters transmission range to base station
- Built-in LCD calibration
- 3 IR beam beams
- IP 66 waterproof
- Works both day and night.
- 500 Mah rechargeable battery transmitter beam
- 1000 Mah battery receiver beam
- 3.3 volts voltage
- Static power consumption of 0.5mA
- Built-in LCD calibration for correct placement
- Flexible mounting pieces
- From -30 to 70 degrees working temperature
- Battery charges via solar panel

Package contents:
1 x Base station driveway detector
1 x Solar IR beams set 100M
1 x Mounting material
1 x Manual

Vragen:Driveway indicator IR beams Solar Line 100M PLUS

Reviews
8.6
8.6 / 10
Thuiswinkel Zakelijk
sitcon-keuzehulp-beveiligingscamera

Visit Our
stores in Utrecht (NL)
or Maaseik (BE)

Order now:

Driveway indicator IR beams Solar Line 100M PLUS

Driveway indicator IR beams Solar Line 100M PLUS