Ramp indicator PIR iConnect Black SMART

This driveway detector PIR iConnect SMART, color black, is an IP54 motion detector with receiver that is connected to the internet via an Ethernet cable or SIM card. When the ramp detector detects movement, you will receive a Push notification on your smartphone.

How does the driveway indicator PIR iConnect SMART work:
The Hub is the base station of the system. It can be connected to your router with the included Ethernet cable or fitted with a SIM card to connect to the Internet. Then you install an App on your smartphone. Via this App you configure the ramp indicator and set the way you want the system to work. The motion detector works on battery and wirelessly sends a signal to the hub. You then place the motion detector outside at the place you want to protect. If you also want to hear an acoustic signal, you can expand the system with an indoor siren that has a bell function.

High Accuracy Motion Detection:
The motion detector has a very small detection angle of 6 degrees, which means that the detector can detect certain movements very specifically. The sensor thus sets out a line, as it were, which gives a message if it is broken.

Expanding the driveway indicator PIR iConnect SMART:
The system has many expansion options to make it a complete alarm system. You can connect up to 100 detectors and up to 10 surveillance cameras to the base station. See the recommended extensions below under accessories or contact us for a suitable proposal.

Wireless but safe:
Where there is a risk of jamming or disrupting the signal with other wireless alarm systems, the alarm system has a special function for this. The communication between the Hub and the detectors is 2-way. this means that every 12-300 seconds (adjustable) a check takes place to see whether the detectors are still responding. When a connection can no longer be established with this, the system will give an alarm message.

Properties PIR motion detector SMART:
- Wireless battery operation
- CR123A battery installed
- Up to 3 years of battery operation
- Sensitivity adjustable
- Up to 10 meters motion detection
- Exclude pets up to 15 kilos and 40 cm in height
- Detection angle 6 horizontally and 90 degrees vertically
- IP54 housing
- Works both during the day and at night
- 0.15 seconds reaction time
- Up to 1700 meters range to base station in open space
- 868.0 - 868.6 Mhz wireless frequency
- AES encryption wireless connection
- Can be used from -25 to 60 degrees
- Notification on sabotage and jamming/disruption
- Grade 2 certified
- 134 x 44 x 36mm

Features Hub base station:
- Hub with Ethernet and SIM card connection
- Android and iOS smartphone App
- No subscription costs
- Connect up to 100 sensors
- Set up to 50 users
- Set up to 50 rooms
- Up to 9 groups can be set/
- Alarm signal within 0.15 seconds
- SMS message*, Call* or Push notification in case of alarm. *When inserting SIM card
- ARM processor
- 110 - 240 volt power supply via adapter
- Hub Backup battery up to 15 hours
- AES encryption between host and sensors
- Up to 200 meters range between sensors in open space
- 868.0 - 868.6 Mhz frequency sensors
- Protection against tampering and jamming / jamming signal
- Connect up to 10 cameras

Package contents:
1 x Hub base station - Black (brand Ajax Systems)
1 x PIR motion detector - Black (brand Ajax Systems)
1 x Accessories
1 x Manual