Shock lamp surveillance camera set SMART 5

This shock lamp camera set SMART comes complete with recorder, 5 shock lamp cameras, cables and accessories so you don't need anything else. This user-friendly camera system can be placed both indoors and outdoors and has handy functions such as live viewing from your smartphone and two-way audio.

How does the SMART shock light camera system work?:
The recorder is the central point in the setup of this system. From the recorder, the utp cables run to the cameras, a network cable to your router and optionally an HDMI cable to your TV or monitor. The recorder has a built-in hard drive where the images are stored continuously or during movement.

Shock lamp function:
This camera is equipped with 2 high power LEDs which can be set via the recorder to switch on, for example, when movement is detected between certain times. This creates a shock lamp effect while of course recording simultaneously. In addition to the times for which this function is used, other things such as the intensity can also be set in the recorder. These high power LEDs work independently of the normal night vision LEDs, so even when they are not on, you have a clear image of up to 20 meters at night. 

Two-way audio:
The shock lamp camera is equipped with both a microphone and a speaker and can therefore sound an alarm in the event of movement, but you can also communicate with the person near the camera via the smartphone APP.

Power over Ethernet (POE):
The camera supports power over ethernet (POE) and can therefore be connected directly to the recorder with the supplied UTP network cable. The recorder has a built-in POE switch that supplies the cameras with power directly and where the image and possibly sound also run via the same cable.

Motion detection and recording:
The 8-channel recorder comes with a hard drive and is set by default to record when there is movement. With 8 cameras, it takes up to a month on average before the hard drive fills up. When this happens, the oldest images will automatically be overwritten.

- Pre-record function:
Even the five seconds before the movement is captured, so you always have the complete event recorded.

- Motion detection distance:
Motion detection works by analyzing the image and therefore works as far as the camera has a view.

- Exclude part from motion detection:
You can select which part of the image the motion detection should or should not detect.

- Exclude part from recording:
In addition to excluding a part of the motion detection, it is also possible to select a certain area in the image that will not be recorded. You then place a privacy mask over the part that you want to block, which will then be visible as a black area. This way you can aim the camera as you wish without privacy-sensitive parts or, for example, your neighbors being recorded.

- Adjust motion detection sensitivity:
You can specify how much motion must occur before it is detected and recording starts. For example, you can lower the sensitivity if there are too many motion alerts.

- Set times for motion detection:
The recording schedule can be set so that it can be determined per day and time whether recording should take place in the event of movement.

View images via the APP or PC:
Software is supplied with the recorder that is suitable for Windows, Mac, iPhone and Android. You connect the recorder to your router with the supplied network cable and thanks to the P2P function you do not have to adjust any settings in your router. From that moment on, you can view the live images, but also the recorded images from the same location, but also remotely, via the secure server. A push notification can be set if desired so that you receive a notification via the APP on your smartphone in case of movement.

Viewing images on a TV (monitor):
The recorder can be connected directly to a TV or other monitor with HDMI input using the supplied HDMI cable. The recorder also has a VGA output for use with monitors that do not yet support HDMI.

Optional: Wireless operation via power network with Powerline Adapters:
With the separately available powerline adapters it is possible to have the camera work wirelessly, so that a cable no longer has to be pulled from the recorder to the camera. The images are then sent by the Powerline adapters via the power grid. You place a powerline adapter (receiver) with the supplied network cable on the recorder. Then you also place a powerline adapter (transmitter) near the camera, which you also connect with the supplied network cable. With these powerline adapters it does not matter whether the powerline adapters are connected in the same group or phase as long as they are behind the same meter cupboard.

Install it yourself or have it installed?:
Although this wireless camera system is easy to install yourself, you can of course also have the system installed at your location. We are happy to put you in touch with a specialized company, so that their experienced installers ensure proper operation, adjust the settings to your wishes and provide you with an extensive product explanation.

Features of the shock light camera:
- 2 MP lens
- 3D noise reduction
- HDR true-to-life colors
- 104 degree fixed lens
- PIR detection up to 12 meters, 115 degrees
- Night vision up to 20 meters
- 0.05 [email protected], 0 lux with IR on
- 820nm IR LEDs (invisible light beam)
- 2 LED shock lamps
- IP 66 Waterproof
- Suitable for indoor and outdoor use (-40°C to +50°C)
- POE (Power over Ethernet)
- 7 cm diameter and 15.1 cm long

Recorder Features:
- 8 channel recorder
- Up to 5MP resolution support
- 2 TB hard drive built-in
- Privacy mask (cover area with a black area)
- Motion detection with advanced options
- Continuous recording capability
- Disabling recording per camera possible
- Overwrite images when storage is full or periodically
- Back up images via USB stick, computer or smartphone
- Multiple users and rights can be set
- Live images & playback via monitor, computer
- Live images & playback via smartphone and tablet
- Live images & playback via computer
- Smartphone/tablet app for Apple & Android
- Software for Windows & Mac
- P2P function so that changes to your router/network are not necessary
- Push notification on motion adjustable
- No monthly fees
- Secure servers
- The system works independently of your network. An internet connection is only required if you want to watch remotely.
- System recovery on power failure with notification
- The recorder has the following connections
- 1 x UTP with PoE (max. 8 cameras)
- 1 x UTP (internet or 4G router)
- 1 X HDMI
- 1 X VGA
- 2 x USB
- 1 x relay (with alarm in/out)
- 1 x audio line-out
- 1 x power supply 48 V

Package contents:
1 x 8 Channel Recorder - SMART
5 x Shock light camera - SMART
5 x 20 meter UTP cable (other lengths on request)
Screws and plugs cameras
All necessary accessories
Manual