SCS-P1200P2 Powerline adapter + POE (Transmitter)

This SCS-P1200P2 Homeplug AV Powerline Adapter with 30W POE injector is the ideal accessory to connect (UTP / Network) IP cameras via the power network to a network video recorder (NVR) or computer.

Use with (UTP) IP cameras:
With this accessory all IP cameras can be made wireless. You connect an SCS-P1200P1 between your NVR and a power outlet with the supplied UTP cable. This SCS-P1200P1 will then automatically set itself as master (distributor). Then connect an SCS-P1200P2 to the place where you want to place the IP camera and connect the IP camera to the SCS-P1200P2 using a UTP cable. The IP camera will now receive power from the SCS-P1200P2 and the video / data transmission will now be through the power network. If you want to connect multiple IP cameras, you still only need to use 1 SCS-P1200P1 with the NVR. You therefore need 1 SCS-P1200P1 and 4 SCS-P1200P2 adapters to connect 4 IP cameras via the mains.

Use in different groups / phases:
By using a new technology, it is in 99% of the cases not important that the powerline adapters are placed in the same group or phase as long as they are behind the same meter cupboard.

Features SCS-1200P2 Homeplug Powerline Adapter + POE:
Built-in 30W POE injector
- 55V via CAT5E / CAT6
- 1200 Mbit / s data speed
- Qos
- 3.9 Watt power consumption
- Range up to 200 meters
- Plug & Play
- IEEE 802.3 / 802.3u, IEEE802.3af + PSE
128-bit AES encryption
- 115 x 65 x 30 mm
- 300 grams

Package contents:
1 x SCS-P1200P2
1 x 1.5 meter UTP cable