PIR MOTION DETECTOR WITH ALARM
Do you want to use a simple monitoring system? In that case, opt for this motion detector with alarm . The system is easy to install and can be used as a detector for visitors or as a ramp indicator. The motion detector must be equipped with batteries, then the equipment can do its work. The siren also works on batteries, so there is no wiring on this system and you can easily install it. You can adjust the siren in your own way, as an alarm or as a doorbell. The PIR motion detector has a range of up to 10 meters, the distance between the siren and motion detector may not exceed 50 meters. This distance depends on the number of walls and objects that are located between the siren and motion detector.
DRIVER WATCH WITH OUTDOOR LAMP
This ramp indicator is supplied with an outdoor lamp . The lantern comes on when your PIR motion sensor is activated. You can also have the motion detector sound, so you get a signal when someone walks over your site. You choose whether this is the sound of a doorbell or alarm. You can also set how long the outdoor lamp stays on when motion is detected, so you can adjust the system to your needs.
DRIVER WATCH WITH IR BEAMS
This ramp indicator consists of a base station and two IR beams with solar panels . The base station gives an alarm signal if the IR beams are interrupted. There are three light beams between the IR beams, when installing the system the IR beams must be set correctly. If the space is more than 30 meters, it is necessary to use laser equipment or a spirit level for this. You can adjust the volume yourself, in addition, a reminder can be sent over time. There can be a distance of up to 100 meters between the IR beams, the distance from the base station can be up to 500 meters. Because of the power of this system, it is possible to enjoy the equipment even in bad weather. This way you can always count on the reliability of the system.
DRIVER WATCH WITH BUILDING LAMP
Do you want to deter burglars? Then opt for a driveway indicator with a construction light . If your PIR motion detector is activated, a construction lamp will be switched on automatically. This PIR motion detector is built into your construction light and is connected to a wireless receiver. Your receiver can emit a ring tone or alarm, so you know exactly at what time your ramp indicator is activated.
