Wireless receiver with PLUS EU outputs

The Wireless receiver with outputs PLUS makes it possible to connect your driveway detector to external equipment. Consider an app module, siren, lamp, flash, relay, gate control or other system that must respond as soon as a vehicle, visitor or person is detected.

With this receiver you can use the wireless detection of your PLUS driveway detector not only for a ring signal, but also as a switching signal. This allows you to turn a standard driveway detector into a comprehensive warning and switching system for your home, yard, business premises, warehouse, workshop or entrance gate.

Are you looking for the best receiver for a driveway detector with which you can connect an app module, siren, lighting or other system? Then this Wireless receiver with PLUS outputs is the most versatile receiver within the PLUS range.

Why choose a receiver with outputs?

A standard receiver usually only emits an audio signal when a wireless motion detector or light barrier is activated. This is sufficient if you only want to hear that someone is coming from inside, but less suitable if you also want to switch equipment.

This receiver with outputs goes one step further. The received signal from the driveway detector can be used to control external devices, such as an app module, siren, lamp, flash or relay module.

Important advantages of this PLUS receiver are:

– Suitable for connection with external equipment
– Can be used with app module, siren, lamp or flash
– Ideal for driveways, gates, yards and business premises
– Wireless reception from PLUS sensors
– Makes your driveway detector suitable for custom applications
– Useful for homes, businesses, sheds and agricultural areas
– Suitable for technical connections via output or relay

What can you connect to this receiver?

This receiver for driveway warning lights has been developed to activate almost any warning or switching system. This means you are not limited to a standard ring signal, but you can adjust the notification to your own situation.

In practice, this receiver is often used when a notification must be visible, audible or externally available in multiple ways. For example, you can simultaneously switch on a lamp, activate a siren and have an app module send a notification.

– App module for notifications on smartphone
– Indoor or outdoor siren
– Warning lamp or flashing lamp
– LED spotlight or area lighting
– Flash for warehouse, shed or workshop
– Gate control or fencing control
– Alarm system or security system
– Relays for custom applications
– Low voltage switching for external equipment
– PLC or building management system where technically appropriate

Connect the app module to your driveway detector

A frequently used application is connecting an app module. The driveway detector then detects movement via a wireless sensor, after which the receiver with outputs passes the signal to the app module.

This way you can receive a notification on your phone when someone approaches the driveway, gate or entrance. This is useful when you are not always near the standard receiver, for example in a large yard, warehouse, workshop, shed or business premises.

Switch on siren or flash

With this receiver you can have a suitable siren, strobe or acoustic detector respond as soon as the driveway detector is activated. This is especially practical when the message must be clearly audible or visible over a larger area.

A siren can be used as an immediate warning or as a deterrent. A flash or warning lamp is useful in noisy environments, such as a workshop, shed, warehouse or site where a normal ringing signal is not always clearly audible.

Switch on lighting upon detection

With the correct connection, the receiver can also be used to make lighting respond to a message from the driveway detector. As soon as a car, visitor or unauthorized person is detected, a lamp, spotlight or other light source can be switched on.

This provides an extra view of the driveway and can also have a preventive effect. This is a practical extension of a standard driveway detector, especially for dark entrances, rear areas, gates, parking lots and business premises.

Advantages over a standard receiver

A normal receiver is mainly intended to provide a ringtone or signal. This receiver with outputs is intended for situations in which you also want to use the detection signal to control other devices.

This allows you to use the same signal for multiple applications at the same time. Think of a notification on your phone, a siren inside, lighting outside and a warning lamp in a warehouse or workshop.

Suitable for companies and sites

In addition to private applications, this receiver is often used in companies, sheds, storage areas, agricultural companies, campsites, showrooms, garages and workshops. When a vehicle or visitor is detected, a warning signal, lighting or notification can be automatically sent to personnel.

This creates a professional access warning without the need to install cabling to the detection points. The wireless sensor remains in the desired location at the driveway, passage or gate, while the receiver emits the switching signal indoors or at a technical location.

Who is this receiver suitable for?

This receiver is especially suitable for users who want to expand their driveway detector with additional functions. For just a simple ring signal, a normal table receiver, portable receiver or socket receiver is often sufficient.

However, if you want to connect external equipment, a receiver with outputs is the right choice. Please note that connecting relays, app modules, sirens, lighting or gate controls may require some technical knowledge.

Commonly used applications are:

– Entrance notification with extra siren
– Driveway detector with app notification on phone
– Switch on lighting upon detection
– Activate flash upon movement
– Link with gate, fence or access control
– Warning on property, premises, shed or warehouse
– Reporting to staff or reception
– Extra warning for remote buildings or sheds

Expandable when your situation changes

An important advantage of the PLUS system is that you can easily expand later. You can start with one sensor and one receiver and later add additional sensors, receivers, app modules or warning devices without completely replacing the system.

This makes this receiver suitable for both private and professional applications where flexibility is important. If your terrain changes, you want to monitor additional entrances or want to add an app notification or siren later, the system can be expanded.

Compatible with the PLUS line

The receiver is intended as an extension within Sitcon's PLUS system. This system consists of wireless motion detectors, light barriers and various receivers that can be combined depending on the situation.

This allows you to start small with a simple driveway detector and later expand with additional sensors or receivers. The receiver with outputs is especially interesting when the signal must not only be audible, but also switchable.

Use in practice

In a home, this receiver can be used to switch a lamp in the driveway in addition to a ringing signal. On a business premises, for example, the same receiver can activate a flash or siren when movement is detected outside opening hours.

This is also a practical solution for agricultural companies, storage areas, garages and workshops. You decide which equipment should respond as soon as the driveway detector reports a detection.

Connection and installation

The wireless connection with a suitable PLUS sensor ensures that no cable is required between the detector on the driveway and the receiver. The receiver is placed where you want to use the output to connect external equipment.

The exact connection depends on the device you want to connect. This is often easy to achieve for simple low-voltage equipment, but for connections to lighting, sirens, gates or other installations, installation by a technical person or installer may be wise.

Buy a wireless receiver with PLUS outputs at Sitcon

Sitcon has been a specialist in security products since 2007 and tests products itself for quality, reliability and practical use. This allows us to provide good advice on which sensor, receiver or extension best suits your situation.

You can order this product online or view it in our stores in Nieuwegein and Maaseik. Sitcon is affiliated with Thuiswinkel Waarborg and is happy to help you put together a complete driveway detector system with bell, app module, siren, lighting or other external connection.

Frequently asked questions