Monitor the driveway with a reliable ramp indicator

  • 3 Oct 2018

The driveway indicator is an access detection system that draws your attention to visitors. Wireless and easy to install: a driveway indicator offers you extra security. In addition to wireless ramp indicators, you can also choose from an alarm with motion detection or electric shock lamp. Which system do you choose?

Driveway indicator up to 100 meters away

You have good reasons to protect your driveway, for example because you want to block unwanted visitors. A driveway indicator with IR beams consists of a base station and wireless detectors. The detectors are equipped with a built-in solar panel, so you do not have to use mains power. The base station is supplied with mains power via the supplied adapter. Wireless beams can be placed at a maximum of 500 meters from the base station. This is sufficient for most driveways and access roads.

Place your beams directly opposite each other and do not allow the maximum distance to exceed 100 meters. Beams have three IR rays, when these are broken simultaneously you will receive a notification.

Camouflage camera alarm as a ramp indicator

Do you want to continuously monitor the driveway without immediately noticing? The camouflage camera works with a motion detector or timer. Sharp photos are taken and forwarded to an e-mail address or telephone number that you specify. The device also makes video recordings (of 640 x 480 pixels). The eight supplied AA batteries work for a user duration of up to 3 months. The camouflage camera is a very practical ramp indicator for remote areas and for places where there is no power.

Alarm with motion detection

The PIR alarm with motion detection is provided with a monitoring function. This allows you to listen to what is happening in the environment, always and everywhere. The motion detector responds up to a distance of 4 meters. The standby time can be up to 20 days. You can also use the supplied adapter and mains power.

How does the PIR alarm work ? You place a SIM card in the device. Calling the number of the SIM card with number recognition will open the microphone and set your telephone number as an emergency number. The linked number is called on movement. You are responsible for sufficient calling credit. Motion detection can be activated remotely with an SMS.

There is also a motion detector with a siren. This is equipped with two remote controls and gives a 110 decibel alarm. All movements made within an angle of 110 degrees and a distance of 8 meters can be detected by the alarm.

Shock lamp or outdoor lamp with motion detector

Keep burglars away by means of a shock or outdoor lamp. This puts malicious parties directly in the spotlight. The 300 watt shock lamp has a wireless range of 50 meters. In addition, it has PIR detection up to 12 meters. The wireless receiver gives a clear alarm when receiving a signal.

The outdoor lamp with motion detector is also an effective deterrent. This has a wireless range of 50 meters. Upon movement, the lamp comes on and a signal is sent to the receiver, who then sounds a ringtone or alarm. The wireless receiver with siren works on three AA batteries.

Share:

Posted in Alarm systems