Wireless combi camera set with screen EASY 6

This wireless combination camera set EASY 6 consists of a NVR, 10 inch camera monitor, 3 battery cameras and 3 wireless cameras with power supply. The NVR receives the image with sound from the wireless cameras wirelessly and can store this on an SD* card or HDD*. Both not included.

Operation of wireless camera:
The wireless camera is equipped with a replaceable battery pack that allows the camera to be on standby for up to 2 years and still has an operation of up to 4 months with 20 movements per day where 10 seconds are filmed each time. When the battery is almost empty, a message will appear on the camera in the APP, so that you can recharge the battery in time. The battery can be quickly disconnected via the 'quick release' system and recharged within a day with the supplied charger. Separate battery packs are also available for quick exchange.

How to install the wireless camera system?
The NVR is the central unit in this wireless camera system. The NVR receives the images from the camera wirelessly, records them when there is movement and ensures that you can view the images via the 10 inch monitor or smartphone App. Both the NVR, monitor and the 12 volt camera must be supplied with power using the supplied adapter, but of course not the battery camera. The transmission of the video and audio is completely wireless.

Wireless camera operation:
The wireless camera must be powered by the supplied adapter. The advantage of this over battery operation is that you do not have to monitor the battery status and the camera continuously transmits images, allowing you to monitor continuously.

Wireless secured signal:
Because this wireless camera set uses a digital signal, a maximum distance of 100 meters is possible between the camera and the NVR. With a maximum of 3 walls, this is still about 40 meters. Because the wireless cameras are linked to the NVR, the wireless signal is very stable and interference-free.

Support up to 8 wire-free cameras:
The NVR supports up to 8 wireless cameras with simultaneous recording. Additional cameras can be added to the set at the top of the page.

Micro SD card and HDD support NVR:
The NVR has the ability to store images on a micro SD card up to 256 GB and it is possible to place a 2.5 inch HD with a maximum capacity of 8 TB. One hour of movement per camera takes up approximately 1 GB.

Motion Detection & Timer Recording:
Because the wireless cameras work with a PIR sensor, the camera will only start up and start filming when there is actual movement. The PIR sensor registers movement up to about 10 meters. Per movement, you can set how long the camera films before it goes back into sleep mode. By default, this is set to 10 seconds. It is also possible to set a timer so that the camera only responds to movement during the specified time period. The cameras cannot be set to continuous recording. However, live images can be requested via the APP, after which the camera will also start up.

View images via smartphone APP:
The free app that comes with the HD recorder is suitable for Windows, MAC OS, iPhone and Android. You connect the recorder to your router with the supplied network cable and the rest happens automatically without having to adjust any settings. From that moment on, you can view the live images, but also the recorded images from the same location, but also at the office or even when you are abroad. In case of movement, you will also receive a notification via the APP on your smartphone via a push notification.

Viewing images on a TV (Monitor):
The HD recorder can be connected directly to a TV or other monitor with HDMI input using the supplied HDMI cable.

Wireless camera features:
- 1920 x 1080 pixels resolution (1/2.7 2MP)
- 3.6mm lens
- F. 2.2 max aperture
- Viewing angle H: 86.99 V: 47.08 D: 105.87
- Metal IP66 waterproof housing
- Wireless digital connection with pair button
- Up to 40 meters wireless range from NVR
- Built-in microphone
- Built-in speaker
- Infrared LEDs for black/white night vision up to 12 meters
- White LEDs for color night vision up to 7 meters
- PIR motion detection up to 8 meters
- Operating temperature from -30 to + 50 degrees Celsius

Features of Wireless NVR:
- Up to 8 wireless cameras can be connected
- 1/4/9 or alternating display images
- H.265 video compression
- Audio G7.11a / AAC
- Up to 1920 x 1080 pixels recording
- 1 to 4 cameras：MAX 20fps@2MP/CH, Bitrate : Auto FPS : Auto
- 5 to 6 cameras：MAX 15fps@2MP/CH, Bitrate : Auto FPS : Auto
- 7 to 8 cameras：MAX 12fps@2MP/CH, Bitrate : Auto FPS : Auto
- Motion detection recording
- Privacy zone adjustable
- Overwrite function
- Pre- and Post-event recording possible with wireless camera on power
- Playback function via date and time or event
- Up to 7 users can be set up with specific rights
- Smartphone App for iOS and Android
- Software for PC
- Web viewer functionality
- P2P connection via European server TUTK
- Dropbox cloud storage support
- 2 USB ports
- RJ56 10/100 LAN ethernet port
- Wi-Fi connectivity via 2.4 GHz band (802.11b/g)
- Menu can also be operated via mouse
- Up to 256 GB SD card support
- Up to 8TB 2.5 inch HDD support
- HDMI output (1024 x 768, 1280 x 1024, 1280 x 720, 1440 x 900, 1920 x 1080)
- DC12V2A power supply
- Max 3.9W power consumption
- 0 to 40 degrees working temperature
- 130 x 66 x 228 mm

Features 10 inch monitor:
- 10 inch
- 1280 x 800 pixels
- 300 cd/m2 luminance
- 160/160 viewing angle
- Video: 1 BNC, 1 HDMI & 1 VGA Connection
- Audio: Jack in
- 1W max built-in speaker
- 800 : 1 contrast
- 16:10 Aspect ratio
- 8 Ms response time
- Active area 216.96mm x 135.6mm
- 100 - 240V - 50 / 60 hz DC 12V/3A
- Pixel pitch: 0.1695 mm
- Max 15W power consumption
- VESA: 75 x 75 mm
- 246 x 231 x 85 mm
- 1.5 KG

Package contents:
1 x NVR recorder - 8 channels
3 x Wireless 12 volt camera
3 x Wireless camera
3 x Antenna
3 x Battery rechargeable
1 x 10 inch camera monitor
1 x Adapter camera monitor
1 x Battery charger
1 x Adapter NVR
1 x HDMI cable 1 mtr
1 x UTB cable 1 mtr
1 x Screws and plugs
No micro SD card
No HDD