Wireless camera set + solar panel EASY 2

This wireless 2-camera set EASY with solar panel distinguishes itself from other (wireless) camera systems by being battery-powered and connected to a solar panel. Therefore, the camera doesn't need to be connected to a power source. The NVR, which does have an adapter, wirelessly receives the video and audio from the wireless camera and can store it on an SD* card or HDD*. Neither is included.

Operation of a wireless camera with solar panel:
The wireless camera features a replaceable battery pack and is connected to a solar panel, which recharges the battery whenever there's sunlight. The battery itself lasts a very long time when fully charged, but when placed in a location with sufficient sunlight, combined with the solar panel, it eliminates the need for recharging during normal use. If the battery does unexpectedly run low, a notification will appear in the camera's app, allowing you to recharge it in time. The battery can be quickly disconnected using the quick-release system and recharged within a day with the included charger. Battery packs are also available for quick replacement.

Wireless secured signal:
Because this wireless camera set with solar panel uses a digital signal, a maximum distance of 100 meters is possible between the camera and the NVR. Even with a maximum of three walls, this still remains approximately 40 meters. Because the wireless cameras are connected to the NVR, the wireless signal is very stable and interference-free.

Supports up to 8 wire-free cameras:
The NVR supports up to 8 wireless cameras with simultaneous recording.

Micro SD card and HDD support NVR:
The NVR can store footage on a micro SD card up to 256 GB, and it can accommodate a 2.5-inch hard drive with a maximum capacity of 8 TB. One hour of video recording per camera uses approximately 1 GB.

Motion detection & Timer recording:
Because the wireless cameras use a PIR sensor, the camera will only start recording and start filming when motion is detected. The PIR sensor detects motion up to approximately 10 meters away. For each movement, you can set how long the camera records before returning to sleep mode. The default setting is 10 seconds. You can also set a timer so the camera only responds to motion during a specified time period. The cameras cannot be set to continuous recording. However, you can request live footage via the app, after which the camera will also start up.

View images via the smartphone APP:
The free app that comes with the HD recorder is compatible with Windows, Mac OS, iPhone, and Android. Simply connect the recorder to your router using the included network cable, and the rest is seamless, with no need to adjust any settings. From that moment on, you can view both live and recorded footage from the same location, at the office, or even when traveling abroad. If motion is detected, you'll also receive a push notification via the app on your smartphone.

Viewing images on a TV (Monitor):
The HD recorder can be connected directly to a TV or other monitor with HDMI input using the supplied HDMI cable.

Features of the wireless camera:
- 1920 x 1080 pixels resolution (1/2.7 2MP)
- 3.6 mm lens
- F. 2.2 max aperture
- Viewing angle H: 86.99 V: 47.08 D: 105.87
- Metal IP66 waterproof housing
- Wireless digital connection with pair button
- Up to 40 meters wireless range from NVR
- Built-in microphone
- Built-in speaker
- Infrared LEDs for black/white night vision up to 12 meters
- White LEDs for color night vision up to 7 meters
- PIR motion detection up to 8 meters
- Operating temperature from -30 to + 50 degrees Celsius
- Operates on replaceable rechargeable Li-ion battery

Features of Wireless NVR:
- Up to 8 wireless cameras can be connected
- 1/4/9 or alternating display images
- H.265 video compression
- Audio G7.11a / AAC
- Up to 1920 x 1080 pixels recording
- 1 to 4 cameras：MAX 20fps@2MP/CH, Bitrate : Auto FPS : Auto 
- 5 to 6 cameras：MAX 15fps@2MP/CH, Bitrate : Auto FPS : Auto 
- 7 to 8 cameras：MAX 12fps@2MP/CH, Bitrate : Auto FPS : Auto
- Motion detection recording
- Privacy zone adjustable
- Overwrite function
- Pre- and post-event recording possible with a wireless camera on power
- Playback function via date and time or event
- Up to 7 users can be set up with specific rights
- Smartphone App for iOS and Android
- Software for PC
- Web viewer functionality
- P2P connection via European server TUTK
- Dropbox Cloud storage support
- 2 USB ports
- RJ56 10/100 LAN Ethernet port
- Wi-Fi connectivity via 2.4 GHz band (802.11b/g)
- Menu can also be operated via mouse
- Up to 256 GB SD card support
- Up to 8TB 2.5-inch HDD support
- HDMI output (1024 x 768, 1280 x 1024, 1280 x 720, 1440 x 900, 1920 x 1080)
- DC12V2A power supply
- Max 3.9W power consumption
- 0 to 40 degrees working temperature
- 130 x 66 x 228 mm

Package contents:
1 x NVR recorder - 8 channels
2 x Wireless camera
2 x Solar panel
2 x Antenna
2 x Rechargeable battery
1 x Battery charger
1 x Adapter NVR
1 x HDMI cable 1 meter
1 x UTB cable 1 mtr
1 x Screws and plugs
No micro SD card
No HDD