GSM / GPS Tracker detector 1217 PLUS
{
calcPageSize();
});
"
loading="eager"
fetchpriority="high"
decoding="async"
/>
GSM / GPS Tracker detector 1217 PLUS
- Customers rate us 8.6 based on 805 reviews
- Experienced customer service and 2 year warranty
- Specialist since 2007. Member of Thuiswinkel Waarborg

Specifications: GSM / GPS Tracker detector 1217 PLUS
| Best for: | Detect listening devices |
|---|---|
| Detect: | 2G (GSM), 3G, 4G, Bluetooth, WiFi |
| Detection range | 1 - 10 Mtr |
| Vibration alarm | Yes |
| Length cm | 120 |
| Height cm | 16 |
| Wide cm | 70 |
| SKU | 7220 |
Pros and cons :
- Detects modern protocols such as 4G, 5G, Wi-Fi and Bluetooth
- Directly deployable without configuration or technical knowledge
- Compact design with metal housing for professional use
- Recognition of interval signals in GPS trackers
- 26 separate channels for precise signal analysis
- Store & forward GPS trackers are harder to detect
- No display of exact location or visual direction indicator
The GSM/GPS Tracker Detector 1217 PLUS is a professional multiband RF detector for detecting hidden transmitters, GPS trackers, and other wireless threats. This advanced detector is designed as an anti-tracking solution for vehicles, offices, and private spaces where privacy and security are paramount. Thanks to support for modern networks such as 4G, 5G, Wi-Fi, Bluetooth, DECT, and various IoT bands, this model is suitable for detecting both classic and advanced spy devices.
Selective multiband detector with global coverage
Unlike simple broadband detectors, the 1217 PLUS operates selectively: the device scans up to 27 separate mobile and wireless bands and filters out interfering signals. This allows for much more sensitive mobile signal detection than standard RF detectors. The internal band table covers all common GSM, 3G, 4G/LTE, and 5G standards worldwide, plus Wi-Fi 2.4/5 GHz, Bluetooth, DECT, and ISM bands. You can also configure which bands are active by region (EU, US, or Total), so the detector is optimally tailored to the country you're searching in.
Detection of mobile signals, WiFi, Bluetooth and IoT
The 1217 PLUS recognizes a wide range of wireless protocols. These include GSM, CDMA, 3G, 4G/LTE, and 5G for mobile communication, as well as Wi-Fi 2.4 GHz and 5 GHz, Bluetooth, DECT, and ISM bands around 433, 868, and 915 MHz. These frequencies are widely used by GPS trackers, hidden cameras, listening devices, smart sensors, and IoT devices. Selective detection allows you to see exactly which type of signal is active, rather than just a single, aggregated RF level.
Four smart search modes: ALL BANDS, GROUP, BAND and TRACKER
The 1217 PLUS offers four search modes that work seamlessly together. In ALL BANDS mode, the detector scans all selected bands simultaneously and displays the signal strength per band group (mobile, DECT, ISM, BT/WiFi). From there, you can zoom in to GROUP to take a closer look at a single group, or to BAND to analyze a specific band in detail. In the special TRACKER mode, only mobile bands are measured and a histogram is created, making intermittent GPS trackers easier to identify. You can choose whether you want to be alerted visually, audibly, or via vibration.
TRACKER mode for GPS trackers and long-term monitoring
TRACKER mode is specifically designed for locating GPS beacons in vehicles or other mobile objects. In this mode, the 1217 PLUS only measures mobile bands and displays a histogram of the last minutes or hours. In normal speed, you see a history of approximately 6 minutes, ideal for test drives. In slow mode, the histogram can be built up over 24 hours, allowing trackers that only transmit data once per day (store and forward) to be detected. The time between signals (period time) measurement function allows you to easily identify recurring transmission intervals.
Step-by-step guide to finding a GPS tracker in a vehicle
- Turn off your own mobile phone and other wireless equipment in the car or put it in airplane mode.
- Choose a route with as few other vehicles and transmission sources as possible in the area, for example outside built-up areas.
- Switch on the 1217 PLUS, select the correct region (e.g. EU) and set the alarm threshold slightly above the background level.
- Start TRACKER mode and drive for a few minutes, watching for periodic spikes in the histogram.
- If you notice a pattern (peaks when moving off, braking or at fixed intervals), lower the threshold and switch to GROUP/TIRE to monitor the tire(s) in question more closely.
- Then use the tire and cluster analysis in combination with a physical inspection of the bumper, chassis, dashboard, wheel arches and hollow spaces to locate the tracker.
Professional service and band selection per region
The BANDS button allows you to easily configure which band groups (MBL1–4, DECT, ISM, BT/WiFi) should be actively scanned. You can disable entire groups or individual bands to reduce the risk of interference and increase sensitivity for specific tasks, such as Wi-Fi/Bluetooth only or mobile networks only. A joystick and clear color display allow you to quickly switch between ALL BANDS, GROUP, BAND, and TRACKER, and fine-tune alarm thresholds.
Practical applications in vehicles, offices and hotels
In vehicles, the 1217 PLUS is used to detect hidden GPS trackers, mobile transmitters, and data modems concealed under the car, in the bumper, behind upholstery, or in the dashboard. In offices and conference rooms, the detector helps check electrical outlets, ceilings, smoke detectors, lamps, and conference tables for active transmitting equipment. In hotel rooms and vacation rentals, this model also offers a quick way to determine the presence of Wi-Fi cameras, Bluetooth devices, or other RF sources.
What does the 1217 PLUS detect and what doesn't it?
The 1217 PLUS is designed to detect devices that actively emit radio frequency signals. This includes GPS trackers, mobile phones in spy mode, wireless microphones, Wi-Fi and Bluetooth cameras, DECT handsets, and IoT transmitters. Devices that are completely passive and do not generate an RF signal, such as simple voice recorders without a wireless module or disabled electronics, cannot be found. Specialized hardware that searches for semiconductor structures is required for such applications.
Working in busy urban RF environments
In urban areas and multi-tenant office buildings, there are often numerous active Wi-Fi routers, access points, mobile devices, and IoT sensors. To perform effective sweeps in such environments, it's wise to first disable known sources where possible and then temporarily deactivate unnecessary bands in the BANDS setting. By setting the alarm threshold slightly higher and monitoring only relevant band groups, it becomes easier to distinguish suspicious patterns from normal background activity.
Use within the law
Using an RF detector like the 1217 PLUS is permitted to protect your own vehicle, home, office, or business premises. However, actively scanning third-party equipment or property without permission may violate privacy and telecommunications regulations. Therefore, use the detector only within the legal framework of your country and, if in doubt, seek legal advice.
Key Features of the GSM/GPS Tracker Detector 1217 PLUS
– Selective multi-band detector with global coverage for GSM, 3G, 4G/LTE and 5G
– Detection of WiFi 2.4/5 GHz, Bluetooth, DECT and ISM bands (433/868/915 MHz)
– Total detection of 27 mobile, satellite and wireless bands
– Four search modes: ALL BANDS, GROUP, BAND and TRACKER
– TRACKER mode with histogram (6 minutes or 24 hours) for interval transmitting trackers
– Fine adjustment of alarm threshold for precise sensitivity setting
– Visual, audio and vibration alarm capabilities
– Display of signal level, band group and time history (histogram)
– Two antenna inputs with supplied antennas for low and high bands
– Built-in rechargeable battery (up to approx. 5 hours operating time)
– Charging via USB (for example via charger, power bank or laptop)
– Metal housing, dimensions approximately 208 × 86 × 41 mm
Package contents
– 1 × GSM / GPS Tracker Detector 1217 PLUS
– 1 × Directional antenna (Micro-Pointer) for higher bands
– 2 × Stabantenantennas (standard and high sensitivity) for lower bands
– 1 × USB charging cable
– 2 × SMA angle adapters
– 1 × Carrying case with protective foam
– 1 × Manual
Please note: right of withdrawal when using
Due to the nature of this product (privacy and detection devices), returns are only possible if the product has not been used. Once the device has been used or tested, the right of withdrawal expires. This falls within the statutory exceptions in consumer law for this type of device.
Buy GSM / GPS Tracker Detector 1217 PLUS at Sitcon
Sitcon has specialized in surveillance and countermeasure technology since 2007. All products are internally tested for reliability and functionality, so you can be sure the detector will perform as promised in practice. Sitcon offers expert advice, has physical stores in Utrecht (Netherlands) and Maaseik (Belgium), and is affiliated with Thuiswinkel Waarborg for secure online shopping.
Frequently Asked Questions about the GSM/GPS Tracker Detector 1217 PLUS
Does this device also detect 4G and 5G signals?
Yes, the 1217 PLUS is specifically designed to detect modern mobile networks, including 4G/LTE and 5G, in addition to older GSM and 3G standards. This also makes it easy to detect advanced GPS trackers and spy devices communicating via these networks.
What types of equipment can the 1217 PLUS detect?
The detector can detect active RF bugs, GPS trackers, mobile phones in spy mode, Wi-Fi and Bluetooth cameras, wireless microphones, DECT devices, and IoT transmitters in ISM bands. The device is designed to detect equipment that emits wireless signals.
How do I use the detector to find a GPS tracker?
First, set your phone to airplane mode and drive the vehicle to a quiet area. Start TRACKER mode, set the alarm threshold slightly above the background, and watch for recurring signal peaks in the histogram. Then, lower the sensitivity and combine the tire analysis with a visual inspection of vehicle areas where a tracker might be located.
Is the 1217 PLUS suitable for home use?
Yes, although it's a professional device, its operation is logical, with clear band groups and LED indicators. This makes the detector suitable for both professional users and private individuals who want to check their home, car, or office for hidden transmitting equipment.
Does the 1217 PLUS also detect WiFi and Bluetooth listening devices?
Yes, the detector recognizes signals in the 2.4 GHz and 5 GHz bands, including Wi-Fi, Bluetooth, Bluetooth LE, and other wireless protocols. This allows it to detect hidden cameras, wireless microphones, and Bluetooth trackers in these frequency ranges.
How exactly does TRACKER mode work?
In TRACKER mode, the 1217 PLUS measures only cellular traffic and builds a histogram over time. At normal speed, approximately 6 minutes of history is displayed, allowing you to see patterns in transmission intervals during a test drive. In slow mode, the histogram can record up to 24 hours of activity, ideal for locating store and forward trackers.
Can I monitor long-term whether my vehicle is being tracked?
Yes, you can use the 1217 PLUS with an external power supply (USB charger or power bank) in slow TRACKER mode. Place the vehicle in a location with as few wireless sources as possible and let the device measure for an extended period. This will also detect trackers that only transmit data occasionally.
How do I deal with environments with many wireless signals?
In RF-rich environments, it's recommended to first disable known sources such as routers, cordless phones, and smartphones. Then, in the BANDS setting, you can temporarily deactivate unnecessary bands and increase the alarm threshold. This makes it easier to distinguish suspicious signals from normal background activity.
Can I export a digital logbook?
No, the 1217 PLUS displays its information via the display, band groups, histograms, and alarm LEDs. History is displayed visually, but there is no function to digitally export log files. The display is intended for quick analysis during the sweep.
Can I use the 1217 PLUS anytime, anywhere?
This detector is permitted for use to protect your own privacy, vehicle, home, or business premises. However, actively scanning third-party equipment or property without permission may violate laws and regulations. Therefore, use the detector only within the legal framework of your country.
Does the 1217 PLUS also detect passive voice recorders?
No, devices that don't emit radio frequency signals, such as simple voice recorders without a wireless module, are not detected by this type of detector. The 1217 PLUS is designed solely for detecting transmitting devices.
Can I use the 1217 PLUS in multiple countries?
Yes, you can use the region selection (e.g., EU, US, or a full bandset) to tune the detector to the mobile bands used in that area. This ensures reliable detection, even when working in different countries.
Is the 1217 PLUS suitable for regular TSCM inspections?
Yes, the selective tire analysis, TRACKER mode, and long-term monitoring make this model ideal for periodic TSCM inspections of vehicles and spaces. The visual display helps quickly identify patterns during repeated sweeps.
Order now:
