Smoke detector + CO alarm kit x 2 White SMART

This smoke detector alarm kit consists of a hub base station with LAN internet connection and 2 smoke detectors with CO and heat detection according to the European standard EN 14604 2005. This set can easily be expanded with other alarm sensors, such as magnetic contacts and motion detectors to create a complete alarm system.

How does the smoke detector alarm kit work?
The Ajax Hub 1 in white is the base station of our Ajax SMART alarm systems. With an Ethernet (LAN) and optional GSM connection, it is the brain of the system. The Ajax Hub can support 100 components and 50 users. The two-way communication runs via an advanced wireless connection technology. The Hub can be fully set, configured and operated via smartphone, but a keypad or remote control can also be connected. A complete line of security products are available to expand your Ajax alarm system can be found below under the heading accessories.

Smartphone App:
The smartphone App for iOS and Android makes it possible to operate all components via a central environment. In addition, a push alarm notification is given via the App in the event of an alarm.

Smoke detector function Ajax Fireprotect Plus:
In the event of smoke development and/or a sudden increase in temperature, the acoustic alarm is activated (85 dB), as well as a light signal, and an alarm message is sent to the SMART Hub. When installing multiple SMART smoke detectors Plus, you can set them to communicate with each other. If an incident occurs in a room that is too far away acoustically, the alarm signal from the other SMART smoke detectors is also activated. The smoke detector checks itself and if too much dust has built up in the detection chamber or the connection to the hub is interrupted, you will receive a warning. All settings and checks are performed with the smartphone app.

CO detection function Ajax Fireprotect Plus:
There are three different situations in which the CO detector can go off:
- 50 ppm (0.005%) for a period of 60-90 minutes
- 100 ppm (0.01%) for a period of 10-40 minutes
- 300 ppm (0.03%) within three minutes

Features Ajax Fireprotect Plus:
- Smoke detection
- Co detection
- Heat detector: Rapid temperature increase (even without smoke) immediately activates an alarm
- Housing is protected against sabotage
- Confirmation of correct operation by ping every 5 minutes
- Can also work autonomously as a regular smoke/CO/heat detector (without SMART Hub)
- Warns the user when the smoke chamber needs to be cleaned
- Battery life is up to 4 years
- 2-way communication via 868MHz
- Power supply: CR123A battery
- Equipped with built-in siren
- Alarm signal volume: 85 dB at 3 meters distance
- The status of the detector can be read via the app
- 132 x 132 x 31 mm
- Weight: 220 grams

Package contents:
1 x Hub 1 - White
2 x Fireprotect Plus White
1 x Adater Hub 1 x UTP cable 30 cm
1 x Mounting material
1 x Manual