GSM / GPS tracker & Wideband detector PRO-W12DX

This wideband transmitter detector PRO-W12DX is a professional digital RF detector that can detect signals between 0 and 10 Ghz. The detector is manufactured in the UK and has a very user-friendly interface. What makes this RF detector different from other radio frequency detectors is mainly that it is possible to put a log on a USB stick and view it later. So you do not have to be physically present during the scan. The log can also be displayed graphically as a graph on the PRO-W12DX to better assess situations.

Log function GSM / GPS tracker detector PRO-W12DX:
The signals observed by the gps tracker detector are stored in a logbook. The advantage of this is that you cannot miss short signals and can view this after the investigation on the PRO-W12DX or even put it on a USB stick via the available USB port.

How to detect GPS trackers with PRO-W12DX?
GPS trackers usually transmit at a certain interval during movement of the object or a certain interval independent of movement. Most GPS trackers are activated by movement and immediately start transmitting information such as location. The transmitter detector will detect these signals and indicate which band and strength this signal is. If there is then movement, it will quickly become visible in the log of this detector which signals are from the same device and thus indicate the presence of a telephone or GPS tracker. Depending on the signal strength compared to the transmitter detector, the location can then be determined up to a few meters.

How to detect phones & gps trackers?
To detect telephones and/or GSM tracker equipment, it is necessary to place the mobifinder for a longer period of time at a certain location where there is a suspicion of improper use of GSM equipment. Every signal that is sent by a GSM device in the detection radius of the detector will be displayed on the display and stored in the logbook. This can be both text messages, calls and data (internet). Because the transmitter detector registers on which band, for what duration and with what signal strength a signal has been detected, it is possible to determine from the log information quite accurately from how many sources the signals come and at what distance they are located measured from the transmitter detector.

Features Wideband transmitter detector PRO-W12DX:
- Detects the latest listening devices. GPS trackers and wireless video equipment.
- High frequency detection up to 12 GHz
- Frequency counter from 0 to 6 Ghz for analog and digital signals
- Live scan option where you can immediately see the detected signals displayed graphically.
- Memory log with a memory of up to 1000 events.
- 2.5 inch color display
- High sensitivity even at high frequencies
- Two antennas included, directional and whip antenna
- For analog and digital signals
- Sensitivity adjustable up to 50 meters
- Mode with beep and silent mode
- Aluminum housing
- Internal Li-ion rechargeable battery

Technical specifications Pro-W12DX:
Antenna Connector MCX Socket - 50 Ohm
Input Frequency Range 1MHz – 10,000 MHz (10.0 GHz)
Sensitivity 100MHz -49 dBm
200MHz -48 dBm
500MHz -47 dBm
1GHz -44 dBm
2GHz -50 dBm
5GHz -42 dBm
10Ghz -30 dBm
Demodulation Sens. for 50mW Audio -30dBm (measured at 500MHz 50% AM 1kHz)
Audio Frequency Response 400Hz – 5kHz +/-2dB
Display TFT Color 2.5' High Contrast Graphic Display
Battery Internal 3.7V 1500 mAH Li-Ion rechargeable
Operating Duration – fully charged battery 8 hours
Charge Time – 4 hours
Operating Temperature Range -15 – +50 degrees C - Relative Humidity < 90%
Dimensions 128mm x 74mm x 26mm
Weight 240 g – Main Unit
Signal Processing and Control RISC Based Microcontroller
Memory 1000 Event Log - non volatile
1 Hour live graph of signal data and frequency

Package contents:
1 x Transmitter detector PRO-W12DX
1 x Adapter, EU, US and UK
1 x Manual

NB: Due to the specific nature of the product, products that have been used cannot be returned.