POE | Power Over Ethernet Injector

With this Power over Ethernet (PoE) injector, you can easily power an IP camera, access point, or other network device using the same network cable that also provides the data connection. This eliminates the need for a separate power outlet near the camera. This makes installation more organized, neater, and flexible, especially in locations where a direct power supply isn't available.

This PoE injector is suitable for situations where the network switch itself doesn't have PoE functionality, but you still want to use a PoE camera or other PoE device. By placing the injector between the switch and the network device, power is automatically added to the network cable.

What is Power over Ethernet and how does it work?

Power over Ethernet is a technology that transmits both data and power over a single UTP network cable. The PoE injector applies power to the data cable, allowing the connected device to use this power directly. This eliminates the need for a separate power adapter at the end device.

This is often used for IP cameras, wireless access points, intercom systems and network transmitters that are mounted in hard-to-reach places, such as ceilings, masts or exterior facades.

Application with IP security cameras

PoE is often used in IP camera installations to connect the camera to the recorder or network switch with a single cable. This separate PoE injector converts a standard network switch to PoE. This is ideal for smaller installations or when you only want to power a single camera via PoE.

This injector also offers a practical solution for temporary installations, test setups or expansion of existing systems.

Easy installation without technical knowledge

Installing this PoE injector is very simple. Simply connect the network cable from your switch to the injector's LAN port. Then, connect the network cable to the PoE device to the PoE output. Finally, plug the included power adapter into a wall socket, and the device is ready to use.

No settings or configurations are required. The injector works completely automatically.

Electrical properties and safety

The PoE injector supports an input voltage of 90V to 264V AC and operates smoothly within a frequency range of 47 to 63 Hz. This makes the injector suitable for use in both residential and business environments. Its maximum current consumption is 0.6A. Thanks to its compact size, the injector can be easily installed in a meter cupboard, server cabinet, or behind a recorder.

Key features of this PoE injector

– Suitable for IP cameras and other PoE devices
– Powers network equipment via a single UTP cable
– No separate power socket required for the camera
– Input voltage: 90–264V AC
– Frequency: 47–63 Hz
– Maximum current consumption: 0.6A
– Compact size: 35 x 50 x 120 mm
– Ready to use immediately without settings

Package contents

– 1 x PoE injector
– 1 x EU power adapter

Buy PoE injector at Sitcon

Sitcon has specialized in security solutions and related network accessories since 2007. All PoE products are tested in-house by Sitcon for functionality, safety, and compatibility with common IP cameras and network systems. You can order this PoE injector online or view it in our stores in Utrecht (Netherlands) and Maaseik (Belgium). Sitcon is a member of Thuiswinkel Waarborg, which provides additional security with your purchase.

Frequently Asked Questions about the PoE Injector