SCS-P500 Powerline adapter set

This SCS-P500 Homeplug AV Powerline Adapter set is the ideal accessory to connect your DVR or NVR camera recorder to your network via the power network.

Use with NVR or DVR:
If you have a camera recorder and you want to view the images on your smartphone via the APP, the camera recorder must be connected to your router. This is of course possible with a network cable, but when the camera recorder is placed in a different room than your router, pulling a cable can be difficult. By using this Powerline adapter set, this is not necessary, because you then use the power cables available on site. You connect the transmitter to the camera recorder with the supplied UTP cable and place it in the wall socket. Then you also connect the receiver to your router with the supplied cable and place it in a socket there as well. The signal will now run through the power cables and adapters from the camera recorder to the router.

Use in different groups / phases:
These powerline adapters work across different groups, but not across different phases. You need our POE version for this, which uses a new technology that makes this possible.

Features SCS-P500 Homeplug Powerline Adapter set
- 500 Mbit / s data speed
- Qos
- 3.9 Watt power consumption
- Range up to 200 meters
- Plug & Play
- IEEE 802.3 / 802.3u, IEEE802.3af + PSE
128-bit AES encryption
- 96.5 x 67 x 23 mm
- 194 grams

Package contents:
2 x SCS-P500 Powerline adapters
2 x 1.5 meter UTP cable