Driveway indicator - Outdoor lamp

The driveway indicator outdoor lamp is a lantern look lamp with built-in PIR motion sensor with wireless receiver. When movement is detected by the PIR sensor, the lamp will turn on and a signal will be sent to the receiver. This wireless receiver can give a ring tone or alarm when a signal is received. In this way you are immediately notified when someone is walking in your garden.

How does the ramp indicator - outdoor lamp work:
The garden lamp must be mounted on a wall horizontally at a height between 1.8 and 2.4 meters. Furthermore, it must be supplied with 230 volt power. There is no plug supplied so it must be connected with wire. You can then set the sensitivity of the PIR motion detector and also at what level of light the lamp comes on when it is moved. Namely, when movement is detected, a wireless signal will be sent to the receiver. This works on 3 x 1.5V AA batteries (included). If there is less light than set, the lamp will also light up when it is moved. You can set how long the lamp stays on after every movement detected.

Properties outdoor lamp:
- PIR motion detector in lantern look lamp
- Can be connected to 230V / 50 Hz
- 433 mhz wireless signal
- Up to 50 meters transmission distance
- Detection angle adjustable to 110 degrees
- Up to 10 meters detection distance
- From 5 seconds to 12 minutes lamp on after detection
- Lux can be set between 5 - 1000
- ES GLS Bulb max. 100 Watt
- IP 44 waterproof

Features wireless receiver :
- Wireless receiver with bell signal and siren
- Works on 3 x 1.5V AA batteries
- 433 mhz wireless signal
- IP 21 only suitable for indoors

Package Contents:
1 x Outdoor lamp with built-in PIR detector
1 x Inside unit
3 x AA batteries
1 x Manual
No lamp included